When you find concrete damage near the apron of your garage, it can be quite a problem. The area is often used to move cars in and out, so you need it to be in good condition. Not only that, but if the damage is left untreated, it can quickly spread and cause further damage to your garage floor.

There are a few ways to repair garage floor apron concrete damage:

1. Concrete Patches

If the damage is not too deep, you can use concrete patches to repair it quickly and cost-effectively. Simply mix the material with water and putty knives until you have a thick paste, which you can apply with a trowel or an old paintbrush. Make sure to press it down firmly to adhere to the surface, and then allow it to dry.

2. Epoxy Resin

If the damage is more serious, you may need to use epoxy resin. This is a more intensive repair process, but it will give you a longer-lasting result. First, clean the area with acetone, which will remove any dirt and oils that could hinder the adhesive. Then, mix up resin in an applicator bottle until it becomes like syrup. Using a plastic spreader or your fingers, apply the epoxy to the damaged area; make sure to press firmly for half an hour, so it adheres well. After allowing it to dry overnight (or for at least 12 hours), use fine-grit sandpaper like #100 grit or #150 grit to smooth down the area until you achieve desired surface finish.

3. Surface Coatings

If either of these two options do not work for you, you can also consider applying a coating over the top of your garage floor. To begin, clean out cracks with a wire brush and vacuum up the dust. Next, mix a quart of concrete resurfacer with water according to package directions, then pour it into a paint roller tray. Using a smooth roller, apply the resurfacer over the damaged area and allow it to dry for 24 hours. You may need to apply two or three coats for desired results.

Whichever option you choose, make sure to take care of the problem as soon as possible to avoid further damage. And if you’re not comfortable doing the repairs yourself, be sure to call in a professional to get the job done right.

Why Call in a Professional?

Repairing damage near apron may seem like a do-it-yourself project, but the garage floor repair process can be quite complex and time-consuming. If you would prefer to leave it to the pros, we suggest using Advanced Construction MN for all your garage floors and home foundation needs. Also, if the damage is more severe than what can be fixed with a patch or a coating, it may require special equipment or skills that the average homeowner does not have. In these cases, it’s best to leave it to the professionals.

At Advanced Construction MN, we have the experience and expertise to handle any garage concrete repair job – big or small. We also use only the highest quality materials, so you can be sure your garage floor will be back in good condition in no time. Contact us today for a free estimate!